临边防护栏使用要求有哪些?
来源:http://pashaishaji.com/ 发布时间:2021-11-15
一、临边防护栏需采用工具化和定型化,规格尺寸以及连接方式应符合相关要求。
1、 The edge guard shall be tooled and shaped, and the specification, size and connection mode shall meet relevant requirements.
二、防护栏由上下横杆、边框以及内竖管或网片焊接而成,上杆离地1.1-1.2m,下杆离地0.5-0.6m,当横杆长度达到2m以上时,需要加设专用立柱。
2、 The protective fence is welded by upper and lower cross bars, frames and inner vertical pipes or nets. The upper bar is 1.1-1.2m above the ground and the lower bar is 0.5-0.6m above the ground. When the length of the cross bar reaches more than 2m, special columns need to be added.
三、防护栏需自上而下加设密网封闭,在栏杆下部应设置高度18cm以上的挡脚板,挡脚板刷红白或黑黄相间的条形警示漆。
3、 The protective fence shall be closed with a safety dense net from top to bottom. A toe board with a height of more than 18cm shall be set at the lower part of the railing, and the toe board shall be painted with red, white or black and yellow strip warning paint.
四、防护栏安装固定需牢固,栏面与横杆的连接应能承受来自任何方向1000N的外力冲击。
4、 The protective fence shall be firmly installed and fixed, and the connection between the fence surface and the cross bar shall be able to withstand the impact of 1000N external force from any direction.
五、在接料平台两侧使用时,需自上而下加挂密网。
5、 When used on both sides of the receiving platform, a safety dense net shall be hung from top to bottom.
六、当临边护栏使用在街道附近时,除防护栏杆外,敞口立面还需满挂密网作全封闭处理。
6、 When the edge guardrail is used near the street, in addition to the protective guardrail, the open facade needs to be fully hung with safety dense net for full sealing treatment.
今天的分享就是关于临边护栏,更多的内容小编会不断的再此分享,更多的内容请继续关注我们:http://pashaishaji.com
Today's sharing is about the edge fence. More content will be shared here. Please continue to pay attention to us: http://pashaishaji.com
- 上一篇:工地彩钢围挡施工要注意什么?
- 下一篇:了解临边护栏的用处以及它的标准