先筛选材料并采购(盘条、铁丝、管材)——进厂检验---调试机器和网片生产---检验与大货的过程检验---胎具制作、框架下料与焊接---检验与过程检验----网片与框架的连(焊)接--检验与过程检验---立柱下料、折弯成型、边耳焊接---检验与过程检验---配套安装检验---电镀锌或热镀锌处理及检验---浸塑处理及检验---成品抽检或全检检验---入库仓储----运输。

 

　　First select materials and purchase(wire rod,iron wire and pipe)-incoming inspection-commissioning machine and mesh production-Inspection and process inspection of large goods-mould production,frame blanking and welding-Inspection and process inspection-connection(welding)between mesh and frame-Inspection and process inspection-column blanking,bending and forming Side lug welding-Inspection and process inspection-supporting installation inspection-electro galvanizing or hot galvanizing treatment and inspection-plastic dipping treatment and inspection-sampling inspection or full inspection of finished products-warehousing-transportation.

　　陕西基坑围栏

 

　　Shaanxi foundation pit fence

 

　　基坑围栏电镀锌工艺：网片电镀前的检验→除锈→水洗→氧化→镀锌→钝化→清洗--晾干→检验

 

　　Electro galvanizing process of foundation pit fence:inspection before mesh electroplating→rust removal→water washing→oxidation→galvanizing→passivation→cleaning-drying→inspection

 

　　基坑围栏热镀锌工艺：网片热镀锌前的检验→脱脂→水洗→酸洗---水洗→浸注镀溶液→烘干预热→热镀锌→整理冷却→钝化→漂洗→干燥→检验

 

　　Hot dip galvanizing process of foundation pit fence:inspection before hot dip galvanizing of mesh→degreasing→water washing→Pickling-water washing→dipping plating solution→drying and preheating→hot dip galvanizing→finishing and cooling→passivation→rinsing→drying→inspection

 

　　基坑围栏浸塑工艺：网片浸塑前的检验—除油打砂—预热—浸塑—吊挂入仓—烘干溜平—检验—成品入库清点—出库运输

 

　　Plastic dipping process of foundation pit fence:inspection before plastic dipping of mesh-degreasing and sanding-preheating-plastic dipping-hanging and warehousing-drying and smoothing-Inspection-warehousing and counting of finished products-outbound transportation

 

　　基坑围栏网片焊接工艺：采购盘条或铁丝—-验证材质---大拔、冷拔丝经的抽检—-校直截断及丝径随时测量-—调机试生产并经检验片网--—批量生产和过程检验--—网片抽检

 

　　Welding process of foundation pit fence mesh:purchase wire rod or iron wire-verify material-Sampling Inspection of large drawn and cold drawn wire-straightening and cutting and measuring wire diameter at any time-adjust the machine for trial production and pass the inspection mesh-batch production and process inspection-Sampling Inspection of mesh

 

　　基坑围栏网框焊接工艺：采购所需边框管材—检验壁厚长度重量—---胎具制作和检验—下料截断---焊接边框—网片与边框焊接-—网框与立柱结构安装检验—批量焊接生产—过程检验---大货清点抽检---半成品清点或仓储。

 

　　Welding process of fence net frame of foundation pit:purchase the required frame pipes-inspect the wall thickness,length and weight-mould production and inspection-blanking and cutting-weld the frame-welding between mesh and frame-installation inspection of net frame and column structure-batch welding production-process inspection-bulk inventory and sampling inspection-inventory or storage of semi-finished products.

 

　　基坑围栏立柱制作工艺：采购所需尺寸的铁管—检验壁厚长度重量—胎具制作和检验----下料截断—折弯成型---焊接边耳----立柱边耳尺寸检验(或与网框的结构安装)—批量焊接—过程抽检—大货清点或仓储。

 

　　Manufacturing process of foundation pit fence column:purchase of iron pipes of required size-Inspection of wall thickness,length and weight-mould making and inspection-blanking and cutting-bending forming-welding side lug-Inspection of column side lug size(or structural installation with mesh frame)-batch welding-process sampling inspection-Bulk goods counting or storage.

 

　　以上的内容分享来自于陕西名威装饰工程有限公司的小编为大家进行分享的，如果大家还有其他的相关疑问的话欢迎给我们进行来电！

 

　　The above content is shared by Xiaobian from Shaanxi Mingwei Decoration Engineering Co.,Ltd.for you.If you have other relevant questions,please call us!