木工加工棚直接关系到施工的防护，对加工棚的定期检测关重要。更不用说工地上用的是木工加工棚，现在只是人流量大的地方。干燥的建筑物需要加工棚。施工现场加工棚是每个施工现场不可缺少的加工棚。在我们的生活中，工地加工棚在工地中起着举足轻重的作用，所以我们要注意工地加工棚是否完工，工地加工棚是否牢固。

The processing shed on the construction site is directly related to the protection of the construction, and is crucial to the regular detection of the processing shed. Not to mention that the woodworking shed is used on the construction site. Now it is just a place with a large flow of people. Dry buildings need processing sheds. The processing shed at the construction site is an indispensable processing shed at each construction site. In our life, the site processing shed plays an important role in the construction site, so we should pay attention to whether the site processing shed is completed and whether the site processing shed is firm.

先检查加工棚脚手板是否松动、悬垂。同时，定期检查加工棚四角是否用铁丝扎牢。发现问题及时修复，防止隐患。

First, check whether the scaffold board of the processing shed is loose and hanging. At the same time, regularly check whether the four corners of the processing shed are fastened with iron wire. Timely repair problems found to prevent hidden dangers.

定期检查加工棚的隔离设施、外协网、悬挑网、外挡板、栏杆、接地防雷设施等，确保设施齐全、牢固、功能正常。如有损坏，应及时更换。加工棚如有松动，应及时紧固。如发现加工棚松动，应及时连接洞口。同时，加工棚施工中应注意以下规定：

Regularly check the isolation facilities, outsourcing network, cantilever network, outer baffle, railing, grounding and lightning protection facilities of the processing shed to ensure that the facilities are complete, secure and functional. If it is damaged, it shall be replaced in time. If the processing shed is loose, it shall be fastened in time. If the processing shed is found to be loose, the hole shall be connected in time. At the same time, the following provisions shall be noted during the construction of the processing shed:

(1)加工棚应设有防护罩、分配器、防护挡板等装置；

(1) The processing shed shall be equipped with protective cover, distributor, protective baffle and other devices;

(2)加工棚安装完毕后，按规定办理验收手续，并由责任人签字确认；

(2) After the installation of the processing shed, the acceptance procedures shall be handled according to the provisions and signed by the responsible person for confirmation;

(3)不得使用同一电机驱动的多功能木工机床；

(3) Multi functional woodworking machines driven by the same motor shall not be used;

(4)加工棚按规定设置操作棚，并具有防雨等功能；

(4) The processing shed shall be equipped with an operation shed as required and shall be rain proof;

(5)施工时应单独设置保护零线，并安装漏电保护装置。

(5) During construction, the protective neutral line shall be set separately and the leakage protection device shall be installed.

如何确定木工加工棚是否危险，我们可以从以上几个方面进行检查，施工现场的加工棚是施工中不可缺少的，平时购买时要注意其加工棚的耐久性，好的加工棚能给我们带来更好的防护！更多相关内容就来我们网站http://pashaishaji.com进行咨询吧！

How to determine whether the woodworking shed is dangerous? We can check from the above aspects. The processing shed at the construction site is indispensable in the construction. Pay attention to the durability of the processing shed when you buy it at ordinary times. A good processing shed can bring us better protection! More relevant content will come to our website http://pashaishaji.com Consult!