施工工程围挡的定义就是将建设施工现场与外部环境隔离，使施工现场成为比较封闭的空间的措施，包括用各种块状材料构筑的围墙、由各种成形板材构成的维护体等。工程围挡分为四种，相关特点要求你都清楚吗？下面工程围挡厂家讲解下：

Construction engineering enclosure is defined as a measure to isolate the construction site from the external environment and make the construction site a relatively closed space, including a wall constructed of various block materials, a maintenance body composed of various shaped plates, etc. There are four types of engineering enclosures. Are you clear about the relevant characteristics and requirements? The following works are explained by the enclosure manufacturer:

一、砌筑式工程围挡

1、 Masonry engineering enclosure

1.房屋建筑工程、建(构)筑物拆除工程、待建(储备)地，以及围挡使用周期1年以上，处于非城市道路且场地相对固定的市政工程应设置砌筑式围挡。

1. Building construction works, building (structure) demolition works, land to be built (reserved), and municipal works with a service life of more than 1 year, which are located on non-urban roads and the site is relatively fixed, should be provided with masonry enclosures.

2.砌筑式围挡应采用加气混凝土砌块、粉煤灰砖及非蒸压灰砂砖等新型砌筑材料砌筑。

2. The masonry enclosure shall be constructed with new masonry materials such as aerated concrete block, fly ash brick and non-autoclaved lime sand brick.

3.砌筑式围挡高度为2.5m，厚度不小于240mm，扶壁柱宜间隔不大于4.5m等距设置。

3. The height of masonry enclosure is 2.5m and the thickness is not less than 240mm. The buttress columns should be set at equal intervals of not more than 4.5m.

二、装配式工程围挡

2、 Fabricated engineering enclosure

1.围挡使用周期1年以内的市政工程、园林景观工程等，应设置装配式围挡。

1. For municipal engineering and landscape engineering with a service life of less than 1 year, prefabricated enclosure shall be set.

2.装配式围挡应采用轻钢结构框架，面板采用双层压型钢板、夹心板、彩色涂层钢板、聚碳酸醋板或其他高度度的板材，围挡结构应稳定。

2. The fabricated enclosure shall adopt light steel structure frame, and the panel shall adopt double-layer profiled steel plate, sandwich plate, color-coated steel plate, polycarbonate plate or other high degree plates. The enclosure structure shall be safe and stable.

3.装配式围挡高度为2.5m，间隔3m等距设置立柱,立柱应采用不小于3mm厚镀锌钢管。

3. The height of the fabricated enclosure is 2.5m, and the columns are set at equal intervals of 3m. The columns shall be galvanized steel pipes with a thickness of not less than 3mm.

4.施工围挡应设置300～500mm高基座，围挡基座应平整顺直，基面应找平处理。

4. The construction enclosure shall be provided with a 300~500mm high base. The enclosure base shall be flat and straight, and the base surface shall be leveled.

三、移动式工程围挡

3、 Mobile engineering enclosure

1.围挡使用周期30天内的工程，应设置移动式围挡。

1. Movable enclosure shall be set for works with enclosure service life of 30 days.

2.移动式围挡可根据项目类型和使用周期，选择简易夹心彩钢板围挡、水马、简易铁马及折叠布艺围挡等形式。

2. According to the type and service life of the project, the mobile enclosure can be in the form of simple sandwich color steel enclosure, water horse, simple iron horse and folding fabric enclosure.

3.简易夹心彩钢板围挡高度为2m，围挡面板为挤塑板和0.3mm厚以上彩钢板的复合板，支撑骨架采用镀锌角钢;支架与地面之间采用螺栓锚固或采用沙袋对支架进行重压固定。

3. The height of the simple sandwich color steel plate enclosure is 2m, the enclosure panel is a composite plate of extruded plate and color steel plate with a thickness of more than 0.3mm, and the support framework is galvanized angle steel; The support and the ground shall be anchored by bolts or fixed by sandbags.

四、特殊工程围挡

4、 Special engineering enclosure

1.特殊围挡是指高度超过3m，刊载户外广告等的大型钢结构围挡。

1. Special enclosure refers to a large steel structure enclosure with a height of more than 3m and outdoor advertisements.

2.设置特殊围挡应符合城市户外广告管理的相关规定，并保证。

2. The setting of special enclosure shall comply with the relevant regulations of urban outdoor advertising management and ensure safety.

四种类型的工程围挡有怎样的特点要求？以上就是问题的相关解答内容了，希望能够给您好的帮助，更多事项就来我们网站http://pashaishaji.com进行咨询！

What are the characteristics and requirements of the four types of engineering enclosures? The above is the relevant answer to the question. I hope it can help you. Please come to our website for more matters http://pashaishaji.com Consult!