Construction site enclosure spraying is a common safety protection measure. By using a spraying system, the diffusion of pollutants and noise on construction sites can be reduced, dust can be reduced, the construction environment can be improved, and the health and environmental quality of surrounding residents can be protected. The spray system can be programmed according to a fixed time and spray volume, with a high degree of automation and easy operation.

在建筑工地围挡喷淋的工程实施中，需要注意以下几点：

In the implementation of construction site enclosure spray engineering, the following points need to be noted:

，应根据工地实际情况进行勘测，确定喷淋管线和喷淋头安装位置，并考虑喷淋管的安装高度、喷头喷射方向角度和喷洒范围，一般3-4米安装一个喷雾头，安装时需车紧喷头，高压管安装到位。

First of all, survey should be carried out according to the actual situation of the site to determine the installation position of the spray pipeline and the spray head, and consider the installation height of the spray pipe, the spray direction angle of the spray head and the spray range. Generally, a spray head is installed at 3-4 meters. During installation, the spray head needs to be tightened and the high-pressure pipe is installed in place.

其次，应选用合适的喷淋设备和高压管道材料，保证设备稳定可靠，并注意采用防止冻裂的措施。

Secondly, appropriate spraying equipment and high-pressure pipeline materials should be selected to ensure the stability and reliability of the equipment, and measures to prevent frost cracking should be taken.

再次，喷淋水源应确保供应充足，并考虑配备水泵设备或蓄水池等外部水源保证正常使用。

Once again, the sprinkler water source should ensure sufficient supply and consider equipping external water sources such as water pump equipment or reservoirs to ensure normal use.

应加强日常维护和管理，安排人员定时更换喷淋泵机油，避免缺失机油导致拉缸；注意清洗喷嘴、检查管线和阀门等设备运行情况，及时处理损坏和故障，保证系统正常运行。

Daily maintenance and management should be strengthened, and personnel should be arranged to regularly replace the spray pump oil to avoid missing oil causing cylinder pulling; Pay attention to cleaning nozzles, checking the operation of pipelines and valves, and promptly handle damage and faults to ensure the normal operation of the system.