工程围挡是一种为了将建设施工现场与外部环境隔离开来，使施工现场成为一个相对封闭隔离空间的设施。下面工程围挡厂家为您解说更多的相关信息。

The engineering enclosure is a facility to isolate the construction site from the external environment and make the construction site a relatively closed and isolated space. The engineering enclosure manufacturer will explain more relevant information for you.

工程围挡的设置使用

Setting and use of engineering enclosure

根据施工地点，条件不同而不同。建筑工程须全封闭，市区主要道路或人流大的不得低于2.5米，其余不得低于1.8米，一般半封闭多见于市政工程，所谓的半封闭指两面或三面设立围挡，一面或两面开放，便于施工机具材料的进出。

The conditions vary according to the construction site. The construction works must be completely closed. The main roads or people flow in the urban area shall not be less than 2.5 meters, and the rest shall not be less than 1.8 meters. Generally, semi-closed works are mostly seen in municipal works. The so-called semi-closed means that two or three sides are set up with fences, and one or two sides are open to facilitate the access of construction machinery and materials.

具体要怎么设置根据招标文件、图纸、现场环境，施工组织设计在保证的情况下来确定。举个例子，假设市政工程在闹市，一个道路维修工程，半幅开放交通，半幅维修，这个时候就需要全封闭，保证不会有行人误入而引发危险。

The specific setting shall be determined according to the bidding documents, drawings, site environment, and construction organization design under the premise of ensuring safety. For example, suppose that the municipal engineering is in the downtown area, a road maintenance project, half open traffic and half maintenance. At this time, it needs to be completely closed to ensure that no pedestrians will enter by mistake and cause danger.

再假设一条新建道路位于郊区，一端与老路相接，另一端为野地，那么只需要在新老路交接处设立单面的围墙和一扇门即可，其余三面可以不封闭。全封闭围挡：将整个施工范围用硬质材料围起来，组成全封闭围墙半封闭：有一面或多个面不设围挡的，即为半封闭。

Suppose that a new road is located in the suburbs, one end of which is connected with the old road, and the other end is a field, then it is only necessary to set up a single-sided fence and a door at the junction of the old road and the new road, and the other three sides can not be closed. Fully enclosed enclosure: the whole construction scope is enclosed with hard materials to form a fully enclosed enclosure and semi-enclosed enclosure: if there is one or more sides without enclosure, it is semi-enclosed.

主体结构为钢结构，多数情况下以角钢焊接的方笼为主立柱，在一些特殊路段也有用矩形管、球形网件等连接，地基浇筑大小受施工现场土质、受风大小影响。面板部分主要用镀锌板封面，还有部分用彩钢板，此中工艺围挡高度2~8米，画面及照明设施，一般与甲方协商，画质肯定是越贵相应的效果质保时间久一些。

The main structure is steel structure. In most cases, the square cage welded with angle steel is used as the main column. In some special sections, rectangular pipes and spherical mesh pieces are also used for connection. The size of foundation pouring is affected by the soil quality at the construction site and the size of wind. The panel part is mainly covered with galvanized sheet, and the other part is made of color steel plate. The height of the process enclosure is 2~8 meters. The picture and lighting facilities are generally negotiated with Party A. The more expensive the picture quality is, the longer the quality assurance period of the corresponding effect will be.

工程围挡的制作注意

Precautions for construction of engineering enclosure

不过实际制作工程围挡广告时有几点忌讳的地方，布局不能过于平，在色彩上尽量鲜艳忌讳整体色调暗淡无光起不到夺目的效果。内容上不能冗长没有内容，空洞无物。然后层次上要清楚不能混乱，

However, there are a few taboos in the actual production of engineering enclosure advertisements. The layout should not be too flat, and the overall color should be as bright as possible. The content should not be lengthy and empty. Then it should be clear at the level that there should be no confusion,

工程围挡在实际的制作过程当中，不一定是一帆风顺的，有的时候有树木的遮挡，有的时候有街角转弯的限制，那么我们为了能够更好的突出工程围挡的广告效应，那就要因地制宜，制作出适合自己项目的围挡。

In the actual production process, the engineering fence is not always smooth. Sometimes it is covered by trees, and sometimes it is restricted by turning around the corner. So in order to better highlight the advertising effect of the engineering fence, we should make a fence suitable for our project according to local conditions.

工程围挡广告的排列要根据项目宣传的实际情况来定，要有比较明晰的排列示意图，这样才能让施工人员和开发商看得清楚明白。

The arrangement of the engineering enclosure advertisement should be determined according to the actual situation of the project publicity, and there should be a clear arrangement diagram, so that the construction personnel and developers can see clearly.

当施工围挡安装完毕后需要将施工工地和外界彻底隔离，以于不被不相干人等进入施工地域，以免进入施工地区发生危险。安装好施工围挡后请安排专人在安装水工围挡的外部进行巡逻维持因安装围挡引起道路不便的次序。更多的事项就来我们网站http://pashaishaji.com咨询！

After the construction enclosure is installed, it is necessary to completely isolate the construction site from the outside, so that no irrelevant people can enter the construction area, so as to avoid danger in entering the construction area. After installing the construction enclosure, please arrange special personnel to patrol outside the installation of the hydraulic enclosure to maintain the order of road inconvenience caused by the installation of the enclosure. Come to our website for more matters http://pashaishaji.com consulting service