Measurement and setting out: Based on the enclosure design drawings, measure and set out the dimensions and plane positions of the enclosure, and determine the specific positions of the columns and enclosures.

基础开挖：根据测量放线的结果，开挖围挡基础，基础深度和大小应根据围挡的高度和重量进行设计。

Foundation excavation: Based on the measurement and setting out results, the excavation of the enclosure foundation should be designed according to the height and weight of the enclosure.

立柱浇筑：在基础开挖完成后，进行立柱的浇筑。立柱应采用预埋件和主体方笼组成，先将预埋件定位到基础坑中浇筑，凝固后将围挡方笼焊接或栓接到预埋钢板上。

Column pouring: After the foundation excavation is completed, the column pouring is carried out. The column should be composed of embedded parts and the main square cage. The embedded parts should be positioned in the foundation pit and poured first. After solidification, the retaining square cage should be welded or bolted to the embedded steel plate.

板面组装：在立柱浇筑完成后，开始进行板面的组装。板面由10块双层中空高强度PVC板组成，板高1900mm，厚度为22mm。板面龙骨焊接完成后，再进行镀锌板面的卯装。

Panel assembly: After the pouring of the column is completed, the assembly of the panel begins. The board surface is composed of 10 double-layer hollow high-strength PVC boards, with a height of 1900mm and a thickness of 22mm. After the welding of the keel on the board surface is completed, the galvanized board surface can be mortise assembled.

画面喷绘：在板面组装完成后，进行画面喷绘安装。画面可以采用广告喷绘布或其他合适的材料，喷绘安装完成后，整个PVC围挡就制作完成了。

Screen painting: After the board assembly is completed, the screen painting installation is carried out. The screen can be made of advertising spray painting cloth or other suitable materials. After the spray painting installation is completed, the entire PVC enclosure is made.

需要注意的是，PVC围挡的生产制作标准还应符合相关的规定和要求。例如，围挡的立柱应采用镀锌钢管进行增强，具有足够的强度和抗冲击性能；围挡内腔应配有镀锌钢管进行增强，具有足够的强度和抗冲击性能；围挡的上下横管也应采用镀锌钢管进行增强，以保证围挡的整体强度和性。此外，制作标准还应规定围挡的规格尺寸、颜色、反光标识等外观要求，以保证围挡的整体美观度和性。

It should be noted that the production and production standards for PVC enclosures should also comply with relevant safety regulations and environmental requirements. For example, the columns of the enclosure should be reinforced with galvanized steel pipes, which have sufficient strength and impact resistance; The inner cavity of the enclosure should be reinforced with galvanized steel pipes, which have sufficient strength and impact resistance; The upper and lower horizontal pipes of the enclosure should also be reinforced with galvanized steel pipes to ensure the overall strength and safety of the enclosure. In addition, the production standard should also specify the appearance requirements of the enclosure, such as specifications, dimensions, colors, and reflective markings, to ensure the overall aesthetics and safety of the enclosure.